9
PPC-4211W User Manual
Chapter 2
S
ystem
Installation
&
S
etup
2.3
Install Memory Card
1.
Loosen the screws as indicated in the red circle. (See Fig 2.7)
2.
Press the red areas to pull out the card holder (See Fig 2.8 ~ 2.10) and open the
rear cover.
3.
Remove the yellow warning tag first. Then remove the screws as indicated in
the red circle. (See Fig 2.11), and take out the CPU heatsink.
Figure 2.7
Figure 2.8
Figure 2.9
Figure 2.10
Note!
Take out the black and gray thermal grease from the accessary box (as
indicated in Figure 2.12). Attach the CPU heatsink after the grease is
applied.
Figure 2.11
Figure 2.12
Note!
CPU cooler pad surface is isolated by anodization treatment to avoid
static electricity (CPU contact side excluded).
