PPC-3100S/3120S/3150S/3210SW User Manual
iv
Safety Instructions
1.
Read these safety instructions carefully.
2.
Retain this user manual for future reference.
3.
Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4.
For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5.
Protect the equipment from humidity.
6.
Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7.
The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8.
Ensure that the power source voltage is correct before connecting the equip-
ment to a power outlet.
9.
Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12.
Never pour liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14.
If one of the following occurs, have the equipment checked by service person-
nel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning or does not operate according to the user
manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15.
Do not store the equipment in an environment where the temperature fluctuates
below -40 °C (-40 °F) or above 60 °C (140 °F) as this may cause damage. The
equipment should be stored in a controlled environment.
16.
Batteries are at risk of exploding if incorrectly installed. Replace only with the
same or equivalent type recommended by the manufacturer. Discard used bat-
teries according to the manufacturer’s instructions.
17.
Power to this equipment should be supplied by an approved power adapter or
DC power source with an output rating of 15 ~ 24V
DC
, 4 ~ 2.5A for board A, or
12 ~ 24V
DC
, 5 ~ 2.5A for board B, and an operating temperature tolerance of 50
°C for SSDs or 40 °C for HDDs. For further assistance, please contact Advan-
tech.
In compliance with IEC 704-1:1982 specifications, the sound pressure level at the
operator’s position does not exceed 70 dB (A).
DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Summary of Contents for PPC-3100S
