Advantech POC-S176 Series, User Manual

Page: 14 / 58

POC-S176 User Manual 4
Touchscreen (optional)
Cleaning/Disinfecting
During normal use of the POC-S176 may become soiled and should, therefore, be
cleaned regularly. Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Wipe the POC-S176 with a clean cloth that has been moistened in the cleaning
solution.
2. Prepare agent per manufacturer’s instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth
1.3 LCD Specifications
! Display type: 17" TFT LCD.
! Resolution: 1280 x 1024
! Colors: 16.7 M (8-bit/color)
! Dot size (mm): 0.264 x 0.264
! Viewing angle: 140°/130°
! Luminance: 300 cd/m
2
! Contrast ratio: 500: 1
! LCD MTBF: 50,000 hours
! Backlight lifetime: 50,000 hours
Table 1.1: Touchscreen Specification
Type Analog Resistive
Resolution Continuous
Light Transmission 75%
Controller RS-232 interface (uses COM3)
Power Consumption +5V@200 Ma
Software Driver Supports Windows 2000,Windows XP
Durability (touches in a lifetime) 30 million
Note! The Point-of-Care Terminal with the optionally installed touchscreen will
share COM3. Once the touchscreen is installed, COM3 cannot be used
for other purposes.
Caution! Do not immerse or rinse the POC-S176 and its peripherals. If you acci-
dentally spill liquid on the device, disconnect the unit from the power
source. Contact your Biomed unit regarding the continued safety of the
unit before placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol. Do not autoclave or clean
the POC-S176 or its peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.