
POC-S197/S177/S157 User Manual
8
G. Power switch
1.5
Point-of-Care Terminal Cleaning and
Disinfecting
During normal use of the POC (Point-of-Care Terminal) the device may become dirty
and should be regularly cleaned.
Steps:
1.
Prepare cleaning agent per manufacturer’s instructions or hospital protocol.
2.
Wipe the POC with a clean cloth that has been moistened in the cleaning solu-
tion.
3.
Wipe thoroughly with a clean cloth.
Cleaning agent list: chemical disinfectants which have been tested on the POC.
No
Cleaning Agents
1
Cidex
2
Isopropyl alcohol
3
Green tinctured soap
4
Windex
5
Alcohol
6
Alcohol 70%
7
Chloride 1000PPM
8
Incidin plus
9
Incidin liquid
10
Mikrozid liquid
Caution!
!
Do not immerse or rinse the POC or its peripherals. If you acciden-
tally spill liquid on the device, disconnect the unit from the power
source. Contact your Biomed Department regarding the continued
safety of the unit before placing it back in operation.
!
Do not spray cleaning agents on the chassis.
!
Do not use disinfectants that contain phenol. Do not autoclave or
clean the POC or its peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
Summary of Contents for POC-S157
