The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
5.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning and keep this equip-
ment away from humidity.
Caution!
To avoid short-circuiting and otherwise damaging the device, do not
allow fluids to come in contact with the device. If fluids are accidentally
spilled on the equipment, remove the affected unit from service as
soon as possible and contact the service personnel to verify that
patient safety is not compromised.
6.
Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage. For plug-in equipment, the power outlet socket must
be located near the equipment and must be easily accessible.
Caution!
To prevent overheating, do not cover the openings or place the device
in direct sunlight or near radiant heaters.
7.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet. Position the power cord so that people cannot
step on it. Do not place anything over the power cord. If the equipment is not
used for a long time, disconnect it from the power source to avoid damage by
transient over voltage.
Caution!
Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20° C (-4° F) or above 60° C (140° F).
This may damage the equipment.
8.
If your computer does not keep the correct time or the BIOS configuration has
been reset to default, the battery may have no charge.
Caution!
Do not replace battery yourself. Please contact a qualified technician or
your retailer.
The computer is provided with a battery- powered, real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace only
with same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
Caution!
The battery charging indicator is not included with this device. It will be
added to the finished system assembly and be shown with the com-
pleted system.
9.
Improper installation of VESA mounting can result in serious personal injury!
VESA mount installation should be operated by professional technician, please
contact the service technician or your retailer if you need this service. The
detail operating procedure is specified in Appendix A.
10.
Classification:
1). Supply Class I adapter
2). No applied part
3). Continuous Operation
4). Not AP or APG category
Warning!
This device is not suitable for use in the presence of flammable anes-thetic
mixture with air, oxygen, nitrous oxide, or for life support systems.
Summary of Contents for PDC-W240
Page 1: ...PDC W240 Widescreen 23 8 IPS LCD Monitor ...
Page 9: ......
