PCM-9562 User Manual
32
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership
change should claim by EHCI driver.
Hotplug USB FDD Support
A dummy FDD device is created that will be associated with the hotplugged FDD
later. Auto option creates this dummy device only if there is no USB FDD present.
>>> USB Mass Storage Device Configuration
Figure 3.19 USB Mass storage Device Configuration
USB Mass Storage Reset Delay
Number of sends POST wait for the USB mass storage device after start unit com-
mand.
Emulation Type
If Auto, USB devices less than 530MB will be emulated as Floppy and remaining as
hard drive. Force FDD option can be used to force a FDD formatted drive to boot as
FDD(Ex. ZIP drive).
3.4
Advanced PCI/PnP Settings
Select the PCI/PnP tab from the PCM-9562 setup screen to enter the Plug and Play
BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlight-
ing it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in
this section. The Plug and Play BIOS Setup screen is shown below.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
