Advantech PCM-9562 User Manual Download Page 38

Page: 38 / 110

PCM-9562 User Manual

Chapter 3

IOS Settings

Auto Flow Control Port4 / Port5

This item allows you to enable or disable auto flow control function.

COM4 / COM5 RS422/485 Control

This item allows you to select RS422 or RS485 control.

Parallel Port Address

This item allows you to select parallel port of base addresses.

Parallel Port Mode

This item allows you to select parallel port of mode.

Parallel Port IRQ

This item allows you to select parallel port of IRQ.

LPT/FDD Switch

This function will switch LPT port to FDD mode.

WatchDog Function

WatchDog function support (Seconds/Minutes).

3.3.5

Hardware Health Configuration

Figure 3.8 Hardware health configuration

H/W Health Function

This item allows you to control H/W monitoring.

Temperature & Voltage show

CPU/System Temperature

Vcore / +3.3Vin / +5Vin / +12Vin / VBAT

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCM-9562















































































































Search results

Summary of Contents for PCM-9562

Reviews:

Related manuals for PCM-9562

Brands by name

Popular brands

Advantech PCM-9562, User Manual

Search results

Summary of Contents for PCM-9562

Reviews:

Related manuals for PCM-9562

Brands by name

Popular brands