background image

2

PCM-5862E/EL User's Manual

Introduction

The PCM-5862E/5862EL is an all-in-one multi-media Pentium
processor-based single board computer (SBC) with a 16-bit audio
controller, a PCI SVGA controller, a PCI 100/10 base-T Ethernet
interface, and one PCI expansion slot.  When using an Intel MMX
Pentium processor, the PCM-5862E/5862EL achieves outstanding
performance that surpasses any other SBC in its class.  This
compact (only 5.75“ x 8”) unit offers all the functions of a single
board industrial computer, but still fits in the space of a 5.25“
floppy drive.

On-board features include 512 KB 2nd level cache, four serial
ports (three RS-232, one RS-232/422/485), one multi-mode
parallel (ECP/EPP/SPP) port, two USB (Universal Serial Bus)
ports, a floppy drive controller and a keyboard/PS/2 mouse
interface.  The built-in high speed PCI IDE controller supports
both PIO and bus master modes.  Up to two IDE devices can be
connected, including large hard disks, CD-ROM drives, and tape
backup drives.

The PCM-5862E/5862EL features power management to minimize
power consumption.  It complies with the “Green Function”
standard and supports Doze mode, Standby mode and Suspend
mode.  In addition, the board‘s watchdog timer can automatically
reset the system or generate an interrupt in case the system stops
due to a program bug or EMI.

Highly integrated multi-media SBC

The PCM-5862E/5862EL is a highly integrated multi-media SBC
that combines audio, video, and network functions on a single
computer board the size of a 5.25" floppy drive.  It provides 16-bit
half-duplex,  8-bit full-duplex, integrated 3D audio and up to 1024
x 768 resolution @ 64K colors with 2MB display memory.  Major
on-board devices adopt PCI technology to achieve outstanding
computing performance when used with Intel Pentium processors,
making the PCM-5862E/5862EL the world‘s smallest and most
powerful all-in-one multimedia board.

Summary of Contents for PCM-5862E























































































































Reviews: