Advantech PCM-4822, User Manual

Page: 32 / 56

26 PCM-4822 User's Manual
2. At the prompt, type AWDFLASH.exe and press <Enter>. The
AWDFLASH.EXE program will then display the following.
BIOS Setup screen
3. At the prompt, type in 4822_SYS.EXE. When you are sure that
you have entered the file name correctly press <Enter>. The
screen will ask “Do you want to save?” If you wish to continue
press Y. If you change your mind or have made a mistake press
N to abort and end the setup procedure.
4. If you decide to continue, the screen will issue a prompt which
will then ask “Are you sure to program (Y/N)?” If you wish to
continue, press Y. Press N to exit the program.
The new BIOS which does not include the boot image will be
written to the ROM BIOS chip. This configuration will remain the
same until you run the
AWDFLASH.EXE program to change the
settings.