Advantech PCM-4380F-M0A2E User Manual Download Page 44

Page: 44 / 106

PCM-4380 User Manual

4.5.2

On-Chip Secondary PCI IDE

If you enable IDE HDD Block Mode, the enhanced IDE driver will be
enabled. Leave IDE HDD Block Mode on the default setting.

Figure 4.4: Integrated peripherals

4.5.3

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.

4.5.4

USB Keyboard/Mouse Support

Select Enabled if user plan to use an USB keyboard. The choice: Enabled,
Disable.

4.5.5

AC97 Audio

Select Disable if you do not want to use AC-97 audio. Option is Auto,
Disable.

4.5.6

Init Display First

This item allows you to choose which one to activate first, PCI Slot or
onchip VGA. The choices: PCI Slot, Onboard.

Summary of Contents for PCM-4380F-M0A2E











































































































Search results

Summary of Contents for PCM-4380F-M0A2E

Reviews:

Related manuals for PCM-4380F-M0A2E

Brands by name

Popular brands

Advantech PCM-4380F-M0A2E, User Manual

Search results

Summary of Contents for PCM-4380F-M0A2E

Reviews:

Related manuals for PCM-4380F-M0A2E

Brands by name

Popular brands