Advantech PCM-3362 User Manual Download Page 58 | Manualshive

Page: 58 / 88

background image

PCM-3362 User Manual

50

5.1

Before You Begin

To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for the PCM-3362 are located on
the software installation CD. The driver in the folder of the driver CD will guide and
link you to the utilities and drivers under a Windows system. Updates are provided
via Service Packs from Microsoft*.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

5.2

Introduction

The Intel® Chipset Software Installation (CSI) utility installs the Windows INF files
that outline to the operating system how the chipset components will be configured.
This is needed for the proper functioning of the following features:

Core PCI PnP services

Serial ATA interface support

USB 1.1/2.0 support (USB 2.0 driver needs to be installed separately for Win98)

Identification of Intel® chipset components in the Device Manager

Integrates superior video features. These include filtered sealing of 720 pixel
DVD content, and MPEG-2 motion compensation for software DVD

5.3

Windows XP/Vista/Win7 Driver Setup

Insert the driver CD into your system’s CD-ROM drive. You can see the driver folder
items. Navigate to the "PCM-3362\01_chipset folder, and find folders including Win
XP, Vista, and Win 7 and choose which of OS you would like to install, and click
"infinst_autol.exe" to complete the installation of the driver.

Note!

The files on the software installation CD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers.

Note!

Wrong driver installation may cause unexpected system instability.

«
...
56
57
58
59
60
...
»

Summary of Contents for PCM-3362

























































































Reviews:

No comments

Related manuals for PCM-3362

Brand: DBM Pages: 50

xCORE-200 Multi-channel Audio board

Brand: XMOS Pages: 112

Wireless Connectivity Cape

Brand: Element14 Pages: 2

Brand: PADAUK Pages: 27

Brand: AC Infinity Pages: 24

Brand: AMD Pages: 27

Brand: EXAGATE Pages: 7

Diamond Systems DS-MPE-CAN2L

Brand: Fortec Star Pages: 36

Brand: OWC Pages: 7

Brand: U-Media Pages: 42

Brand: MSI Pages: 162

Brand: Infrant Technologies Pages: 2

WANswitch W2358DSL

Brand: Datacom Systems Pages: 36

RouterBOARD 433

Brand: 4gon Pages: 2

Brand: A&D Pages: 50

Brand: Spectrum Digital Pages: 22

Brand: NorthStar Pages: 36

Meridian 1 PC Console Interface Unit

Brand: Northern Telecom Pages: 232

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands