Advantech PCL-849, User Manual

Page: 29 / 40

Chapter 3 Software Installation 27
3. Enter [Next], then choose [Connection Port (COM & LPT)]
Hardware Type.
4. Enter [Next], then select [Standard Connection Port Type] for
manufacturer and [Communication Connection Port] for model.
5. Enter [Next], then the default IRQ and I/O Addresses will be
shown. Click [Done].
Up to this point you have added a port to the system without correct-
ing IRQ and I/O settings. You can repeat step 1 to step 5 to add as
many ports as you want (Max. 128 port).
6. Enter [Control Panel], then [System], then [Device Manager].
7. Select the newly added [Communication port (COMn)], where n
is a new port number, then [Resource].
8. Select the ??? as [Basic Configure 8].
9. Double Click on IRQ and type in (select) the hardware IRQ, then
[OK].
10. Double Click on I/O range and type in (select) the hard-
ware I/O, then [OK].
Repeat steps 6 through 10 to setup each port correctly.
11. Click [OK].
12. Restart Windows 95 to initialize the new settings.