2 PCI-7032 Startup Manual
Mechanical and Environmental
•
Dimensions (L x W):
185 x 122 mm (7.3” x 4.8”)
•
Power supply voltage:
+5 V, +12 V, 5 Vsb
•
Power requirements:
PCI-7032G2-00A1E
Intel Celeron J1900 (2GHz), DDR3L 1333, 4GB SODIMM
module*2
Voltage (V)
5 V
12 V
5 V
SB
Current (A)
0.737 A
0.298 A
0.044 A
Total (W)
7.481 W
•
Operating temperature:
0 ~ 60 °C (32 ~ 140 °F) (operation
humidity: 40 °C @85% RH, Non-Condensing)
•
Weight:
- G2 SKU: 0.264 kg
- VG SKU:0.198 kg
Jumpers and Connectors
The board has a number of connectors and jumpers that
allow you to configure your system to suit your application.
The table below lists the function of each of the connectors
and jumpers.
Connectors
Label
Function
LAN12
Dual Gigabit Ethernet connector
VGA1
VGA connector
KBMS1, KBMS2
PS/2
Keyboard and mouse connector
KBMS2
Connects chassis front panel
COM12, COM34
(G2 SKU)
Serial port: RS-232/422/485
JFP1
Power Switch / Reset connector
JCASE1
Case Open
CPUFAN1
CPU FAN connector (4-pin)
LANLED1
LAN1/2 LED extension connector
HDAUD1
HD audio extension module con-
nector
USB12, USB34
USB port 1-4
USB56
USB port 5, 6
USB7
USB port 7 (USB 3.0)
SATA1
Serial ATA1 (300 MB/s)
SATA2
Serial ATA2 (300 MB/s)
MSATA1
Mini-SATA
DIMMA1
Memory connector channel A
DIMMB1 (G2
SKU)
Memory connector channel B
GPIO1
GPIO pin header
LPC1
LPC connector
ATX1
12 V, 5 V, 5 VSB power connector
DVI1
DVI connector
LVDS1
LVDS connector
SMBUS1
SMBUS connector
INV1
LVDS inverter connector
Note:
USB7 is reserved and can not be used.
Jumpers
Label
Function
JCMOS1
CMOS clear
ATXF1
AT/ATX mode selection
JWDT1 + JOBS1 Watchdog timer output selection and
HW monitor alarm
BZ1
Buzzer setting
JLVDS1,
JLVDS2
LVDS panel voltage selection
JLVDS_VCON1
LVDS VESA, JEIDA format selection
CMOS1: CMOS clear function
Closed Pins
Result
1-2
Keep CMOS data *
2-3
Clear CMOS
* Default setting
JLVDS1, JLVDS2: LVDS panel voltage selection
Closed Pins
Result
L1-L2*
3.3 V*
L2-L3
5 V
L2-R2
12 V
* Default setting
JLVDS_VCON1: LVDS VESA, JEIDA Format Selection
Closed Pins
Result
1-2
Pull high to +3.3 V
2-3*
Pull down to GND*
1
2
3
Specifications (Cont.)
Jumpers and Connectors (Cont.)
