background image

Copyright

This documentation and the software included with this product are copy-
righted 2001 by Advantech Co., Ltd. All rights are reserved. Advantech 
Co., Ltd. reserves the right to make improvements in the products 
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or 
by any means without the prior written permission of Advantech Co., Ltd. 
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use, 
nor for any infringements of the rights of third parties which may result 
from its use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM and PC are 
trademarks of International Business Machines Corporation. MS-DOS, 
Windows, Microsoft Visual C++ and Visual BASIC are trademarks of 
Microsoft Corporation. Intel and Pentium are trademarks of Intel Corpo-
ration. Delphi and C++ Builder are trademarks of Inprise Corporation.

CE notification

The PCI-1761, developed by ADVANTECH CO., LTD., has passed the 
CE test for environmental specifications when shielded cables are used 
for external wiring. We recommend the use of shielded cables. This kind 
of cable is available from Advantech. Please contact your local supplier 
for ordering information.

On-line Technical Support

For technical support and service, please visit our support website at:
http://www.advantech.com/support

Note:

✎  

Concerning saving the environment, we'd like to reduce the paper 
used for the user's manuals. Starting with 

Appendix C

, please 

find the PDF file on the CD-ROM.

Part No. 2003176100       

1st Edition

Printed in Taiwan  

November 2001

Summary of Contents for PCI-1761




































Reviews: