11
Chapter 2
Step 9
: Replace the cover of your computer chassis. Re-connect the
cables you removed in step 2.
Step10
: Plug in the power cord and turn on the computer .
Note: In case you installed the card without installing the DLL driver
first, Windows XP/2000 will recognize your card as an “unknown
device” after reboot, and will prompt you to provide necessary driver.
You should ignore the prompting messages (just click the
Cancel
but-
ton) and set up the driver according to the steps described in Section
2.2 Driver Installation.
After the PCI-1752U/PCI-1752USO card is installed, you can verify
whether it is properly installed on your system in the
Device Manager
:
1. Access
the
Device Manager
through
Control Panel/System/Device
Manager
.
2. The
device name
of the PCI-1752U/PCI-1752USO should be listed
on the
Device Manager
tab on the System
Property
Page.
Figure 2.2: Device name listed on Device Manager
Summary of Contents for PCI-1752U
