Advantech PCE-5130 User Manual Download Page 68 | Manualshive

Page: 68 / 102

background image

PCE-5130 User Manual

56

4.1

Before you Begin

To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for the PCE-3132 are located on
the software installation CD. The Intel Chipset Software Installation Utility is not
required on any systems running Windows NT 4.0. Updates are provided via Service
Packs from Microsoft.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

4.2

Introduction

The Intel Chipset Software Installation (CSI) utility installs the Windows INF files that
outline to the operating system how the chipset components will be configured. This
is needed for the proper functioning of the following features:

!

Core PCI PnP services

!

IDE Ultra ATA 100/66/33 and Serial ATA interface support

!

USB 1.1/2.0 support (USB 2.0 driver needs to be installed separately for Win98)

!

Identification of Intel. chipset components in the Device Manager

!

Integrates superior video features. These include filtered sealing of 720 pixel
DVD content, and MPEG-2 motion compensation for software DVD

Note!

The files on the software installation CD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers.

Note!

This utility is used for the following versions of Windows, and it has to be
installed before installing all the other drivers:

!

Windows 2000

!

Windows XP

«
...
66
67
68
69
70
...
»

Summary of Contents for PCE-5130







































































































Reviews:

No comments

Related manuals for PCE-5130

Brand: 3xLogic Pages: 2

ARM Cortex-A9 MPCore

Brand: Dave Embedded Systems Pages: 67

Brand: Paradyne Pages: 45

MultiConnect SE MTS2EA

Brand: Multitech Pages: 8

RDGD3160I3PH5EVB

Brand: NXP Semiconductors Pages: 21

Brand: Homeworks Pages: 24

Brand: LevelOne Pages: 2

Compressor DW-CP04

Brand: Digital Watchdog Pages: 73

ExtremeCloud Appliance E3120

Brand: Extreme Networks Pages: 27

Brand: Fibocom Pages: 39

Brand: Icop Pages: 31

Brand: Adeunis RF Pages: 68

Brand: D-Link Pages: 2

Brand: LG Innotek Pages: 14

Brand: INFRALAN SECURITY Pages: 15

Brand: MikroTik Pages: 7

Brand: StarTech.com Pages: 9

Brand: AMX Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands