Advantech PCE-5130, User Manual

Page: 65 / 102

53 PCE-5130 User Manual
Chapter 3
A
ward
BIOS
Setup
3.11 Password Setting
Follow these steps to change the password.
1. Choose the “Set Password” option from the “Initial Setup Screen” menu and
press <Enter>. The screen displays the following message:
2. Press <Enter>.
3. If the CMOS is good and this option has been used to change the default pass-
word, the user is asked for the password stored in the CMOS. The screen dis-
plays the following message:
4. Type the current password and press <Enter>.
5. After pressing <Enter> (ROM password) or the current password (user-defined),
you can change the password stored in the CMOS. The password must be no
longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select either
“Setup” or “System” from the “Advanced BIOS Features” menu.
3.12 Save & Exit Setup
If you select this and press <Enter>, the values entered in the setup utilities will be
recorded in the CMOS memory of the chipset. The processor will check this every
time you turn your system on and compare this to what it finds as it checks the sys-
tem. This record is required for the system to operate.
3.13 Exit Without Saving
Selecting this option and pressing <Enter> lets you exit the setup program without
recording any new values or changing old ones.
Please Enter Your Password
Please Confirm Your Password