Advantech PCE-5120, User Manual

Page: 19 / 122

3 Chapter 1
The PCE-5120 retains a legacy PCI 32-bit /33 MHz bus from the CPU
board to the Backplane. It does not require a PCI-Express to PCI bridge
chip to lower the system cost. It is good for the application and only needs
a few legacy PCI Buses.
The PCE-5120 is designed with considerations for extended reliability,
and is built especially to suit demanding industrial environments. The
CMOS data backup and restore function protects the BIOS setup data
from loss due to battery failure. A 256-level watchdog timer prevents the
system from hanging up if a program cannot be executed normally. A
remote management port allows users to monitor the system health status
and control the system remotely through standard SNMP/HTTP protocol
when used with Advantech's ACMM-1000 and SNMP-1000 Intelligent
System Manager.
The PCE-5120 also adopts Advantech's unique patented “Sleep Mode
Control Circuit” for AT Power Mode. With this thoughtful design, users
need NOT clear the CMOS after the system enters S3 mode. With all
these excellent features and outstanding performance, the PCE-5120 is
definitely the ideal platform for today's industrial applications.
1.2 Features
• Compliance with PICMG 1.3
• Support LGA 775 Intel® Core™ 2 Duo / Dual Core Pentium® D / Pen-
tium® 4 / Celeron® D FSB 533/800/1066 MHz processors (refer to
“Processor Support” on page vi)
• Support Dual Channel DDR2 533/667 SDRAM up to 4GB
• One PCI Express x 16 Link and Four x1 Link to backplane
• Dual Gigabit Ethernet via PCI Express x1 port
• Support Intel IAMT Technology (optional)
• On board IPMI BMC module (optional)
• 4 SATA2 HDDs (only on SHB)
• Support S/W RAID 0, 1, 5, 10