Advantech PCA-6763, User Manual

Page: 16 / 94

5 PCA-6763 User Manual
Chapter 1
H
ardware
C
onfiguration
1.4 Jumpers and Connectors
Connectors on PCA-6763 single board computer link it to external devices such as
hard disk drives and a keyboard. In addition, the board has a number of jumpers
used to configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label Function
JCMOS1 CMOS clear
JOBS1+JWDT1 Hardware monitor alarm+watchdog timer output selection
BZ1 Buzzer setting
KL1 Keyboard lock
ATXF1 AT/ATX mode selection
JVBR1 LVDS backlight setting
JLVDS1 LVDS panel voltage selection
Table 1.2: Connectors
Label Function
LPT1 Parallel port, supports SPP/EPP/ECP mode
LAN1 Realtek RTL8111E-VL-CG
LAN2
(G2 SKU only)
Realtek RTL8111E-VL-CG
VGA1 VGA connector
KBMS1 External keyboard/mouse connector
KBMS2 Internal keyboard/mouse connector
COM12 Box header for RS-232*2
JIR1 Infrared connector
JFP1 Power Switch / Reset connector
JCASE1 Case Open
LANLED1 LAN1/2 LED connector
HDAUD1 HD audio extension module connector
USB12 USB port 1, 2
USB34 USB port 3, 4
USB56 USB port 5, 6
USB7 USB port 7
SATA1-4 Serial ATA 1-4 (SATA 3.0)
FDD1 Floppy drive connector
DIMMA1 Memory connector channel A
GPIO1 GPIO pin header
LPC1 Low pin count module expansion pin header
PWR1 12 V, 5 V power connector
DVI1 DVI connector
LVDS1 LVDS connector
INV1 LVDS inverter connector
SMBUS1 SMBUS connector
PC-104 PC/ 104 connector