Advantech PCA-6277-B Manual Download Page 103

Page: 103 / 157

8 8

PCA-6277-B User's Manual

6.1 Introduction

Onboard security (OBS) functions monitor key hardware. They help
you maintain your system’s stability and durability.

The PCA-6277-B can monitor 5 sets of system positive voltages, 2

sets of system negative voltages, CPU cooling fan speed, and CPU
temperature.

The positive system voltage sets which can be monitored include:

• CPU core voltage: 1.3 V ~ 3.3 V, according to Intel specifications.
• Transmission voltage from CPU to chipset: typically 1.5 V.
• Chipset voltage: typically 3.3 V.
• Main voltage: +5 V, +12 V.

The negative system voltage sets which can be monitored include:

• Main voltage: -5 V, -12 V.

6.2 Installation

the following sections, refer to the one that provides driver setup
procedure for the operating system you are using.

Summary of Contents for PCA-6277-B






























































































































































Search results

Summary of Contents for PCA-6277-B

Reviews:

Related manuals for PCA-6277-B

Brands by name

Popular brands

Advantech PCA-6277-B, Manual

Search results

Summary of Contents for PCA-6277-B

Reviews:

Related manuals for PCA-6277-B

Brands by name

Popular brands