Advantech PCA-6275 Manual Download Page 14

Page: 14 / 84

PCA-6275 User's Manual

1.3

Specifications

System

• CPU: Intel Pentium

II up to 500 MHz

• BIOS: Award Flash BIOS, 2 Mbit

• Green function: Supports power management operation via BIOS.

Activated by keyboard or mouse activity

• PCI enhanced IDE hard disk drive interface: Supports up to four

IDE (AT bus) large hard disk drives , or other enhanced IDE
devices. Supports PIO Mode 4 (16.67 MB/s data transfer rate) and
Ultra DMA/33 (33 MB/s data transfer rate). BIOS enabled/disabled

• Floppy disk drive interface: Supports up to two floppy disk drives,

5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB, 1.44 MB, and 2.88
MB). BIOS enabled/disabled

Memory

• RAM: Up to 768 MB in three available 168-pin DIMM sockets.

Supports PC100-compliant SDRAMs

• ECC (parity DRAM only): Modules can detect multi-bit memory

errors. Correction of 1-bit memory errors

Input/Output

• Bus interface: PCI/ISA bus, PICMG compliant

• Bus speed:

ISA: 8 MHz
PCI: 33 MHz

• DMA channels: 7

• Interrupt levels: 15

• Enhanced parallel port: Configurable to LPT1, LPT2, LPT3 or

disabled. Standard DB-25 female connector provided. Supports
EPP/ECP/SPP

Summary of Contents for PCA-6275





















































































Search results

Summary of Contents for PCA-6275

Reviews:

Related manuals for PCA-6275

Brands by name

Popular brands

Advantech PCA-6275, Manual

Search results

Summary of Contents for PCA-6275

Reviews:

Related manuals for PCA-6275

Brands by name

Popular brands