manualshive.com logo in svg

Advantech PCA-6180 Series, User Manual

Share
Download
Advantech PCA-6180 Series User Manual Download Page 20

6

PCA-6180 User's Manual

•

Keyboard and PS/2 mouse connector

: A 6-pin mini-DIN

connector is located on the mounting bracket for easy connection
to a keyboard or a PS/2 mouse. An onboard keyboard pin header
connector is also available.

•

HISA

®

: ISA bus high-driving capability up to 64 mA.

1.3.4 VGA interface

•

Supports AGP 2X, 133 MHz.

•

Controller

: Chipset integrated.

1.3.5 SCSI interface

•

PCI SCSI

: Supports 32-bit PCI interface and Ultra 160 SCSI or

legacy single-ended devices; data transfer up to 160 MB/sec.

•

Chipset: 

Adaptec AIC-7892.

1.3.6 Ethernet LAN

•

Supports dual 10/100Base-T Ethernet networking.

•

Chipset

: One onboard Intel

®   

GD82559 and one chipset integrated

LAN controller.

1.3.7 Industrial features

•

Watchdog timer

: Can generate a system reset or IRQ11. The

watchdog timer is programmable, from one second to 255 minutes
(255 levels). See Appendix A for the programming details.

1.3.8 Mechanical and environmental specifications

•

Operating temperature

: 0°~60° C (32° ~ 140° F).

Note:

The temperature depends on which CPU is used.

The range  is 0°~50° (32°~122°F) for a Pentium

© 

 III

933 MHz.

•

Storage temperature

: 0°~ 60° C (32° ~ 140° F).

•

Humidity

: 20 ~ 95% non-condensing.

Summary of Contents for PCA-6180 Series















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands