Chapter 3 Award BIOS Setup
47
You can choose “Delay 4 sec.” If you do, then pushing the button for
more than 4 seconds will turn off the system, whereas pushing the
button momentarily (for less than 4 seconds) will switch the system
to “suspend” mode.
3.7.4 PowerOn By LAN
This item allows you to wake up the system via LAN from the remote
host. The choices: Enabled, Disabled.
3.7.5 PowerOn By Modem
When Enabled, an input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem) awakens the system
from a soft off state. The choices: Enabled, Disabled.
3.7.6 PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The
choices: Enabled, Disabled.
3.7.8 CPU Thermal-Throttling
This field allows you to select the CPU THRM-Throttling rate. The
choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.
3.8
PnP/PCI Configurations
3.8.1 Resources controlled by:
The commands here are “Auto” or “Manual.” Choosing “manual”
requires you to choose resources from each following sub-menu.
“Auto” automatically configures all of the boot and Plug and Play
devices but you must be using Windows 95 or above.
3.8.2 PnP OS Installed
This feature allows you to install the PnP OS. The commands are
“Yes” or “No.”
Summary of Contents for PCA-6180 Series
Page 1: ...PCA 6180 Full size socket 370 Intel Pentium III Celeron processor based PCI ISA bus CPU card ...
Page 22: ...8 PCA 6180 User s Manual 1 4 Board Layout Main Features Figure 1 1 Board layout main features ...
Page 73: ...Chapter 5 AGP SVGA Setup 61 2 Click Next when you see the following message ...
Page 113: ...Chapter 8 Onboard Security Setup 103 6 Click OK to restart Windows ...
