manualshive.com logo in svg

Advantech PCA-6151, Manual, Page: 44 / 46

Share
Download
Advantech PCA-6151 Manual Download Page 44

36    PCA-6151 User's Manual

Installing PC/104 modules (CN2,CN3)

The PCA-6151 card’s PC/104 connector lets you attach PC/104
modules. These modules perform the functions of traditional
plug-in expansion cards, but save space and valuable slots.
Advantech modules include:

• PCM-3110

PCMCIA module

• PCM-3520

Flat Panel/CRT VGA module

• PCM-3810

Solid State Disk module

• PCM-3820/C

High density Solid State Disk modules

• PCM-3610

Isolated RS-232/422/485 module

• PCM-3640

4 Port RS-232 module

• PCM-3290

GPS module

• PCM-3660

Ethernet module

• PCM-3718

30 KHz A/D module

• PCM-3724

48-channel DIO module

PC/104 modules are produced by over a dozen manufacturers, and
the PC/104 form factor is being advanced as an appendix to the ISA
bus standard.

If you want to make your own PC/104 module, make sure that your
module dimensions are correct. A PC/104 breadboard module
(PCM-3910) is also available. For further information, contact your
Advantech distributor or sales representative.

Summary of Contents for PCA-6151















































Reviews:

No comments