Advantech PCA-6008G2, User Manual

Page: 5 / 104

v PCA-6008G2 User Manual
Document Feedback
To assist us in making improvements to this manual, we would welcome comments
and constructive criticism. Please send all such - in writing to: support@advan-
tech.com
Packing List
Before setting up the system, check that the items listed below are included and in
good condition. If any item does not accord with the table, please contact your dealer
immediately.
„ 1 PCA-6008 Pentium M/ Celeron processor-based single board computer
„ 1 PCA-6008 Startup Manual
„ 1 CD with driver utility and manual (in PDF format)
„ 1 FDD cable P/N: 1700340640
„ 1 Ultra ATA 66/100 HDD cables P/N: 1701400452
„ 2 Serial ATA HDD data cables P/N: 1700003194
„ 2 Serial ATA HDD power cables P/N: 1703150102
„ 1 Printer (parallel) port & COM port cable kit P/N: 1700060305
„ 1 Dual COM port cable kit G2 version only) P/N: 1701092300
„ 1 Y cable for PS/2 keyboard and PS/2 mouse P/N: 1700060202
„ 1 Four-USB port cables P/N:1700008461
„ Jumper pack P/N:9689000068
„ 1 ATX 12V power converter cable P/N: 170304015K
„ 1 USB wire P/N: 1700007371
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.