Advantech MIO-9290, User Manual

Page: 36 / 86

MIO-9290 User Manual 28
3.2.3.3 USB Configuration
Figure 3.9 USB Configuration
 Legacy USB Support
Enable the support for legacy USB. Auto option disables legacy support if no
USB
devices are connected.
 USB3.0 Support
This item allows users to enable or disable USB3.0 support.
 XHCI Hand-Off
This is a workaround for the OS without XHCI hand-off support. The XHCI own-
ership
change should claim by XHCI driver.
 EHCI Hand-Off
This is a workaround for the OS without EHCI hand-off support. The EHCI own-
ership change should claim by EHCI driver.
 USB transfer time-out
Set the time-out value for Control, Bulk, and Interrupt transfers.
 Device reset time-out
Set USB mass storage device Start Unit command time-out value.
 Device power-up delay
Set the maximum time of the device will take before it properly reports itself to
the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from Hub descriptor.