Advantech MIO-4370 User Manual Download Page 65

Page: 65 / 86

MIO-4370 User Manual

pte

r 4
AM

I B

S S

etu

4.1.2.11

USB Configuration



Legacy USB Support

Enables Legacy USB support. The Auto option disables legacy support if no

USB devices are connected. The Disabled option will keep USB devices avail

able only for EFI applications.



XHCI Hand-off

This is a workaround for OS without XHCI hand-off support. The XHCI owner

ship change should be claimed by the XHCI driver.



USB Mass Storage Driver Support

Enable/Disable USB Mass Storage Driver Support.



USB transfer time-out

Time-out value for control, bulk, and interrupt transfers.



Device reset time-out

USB mass storage device start unit command time-out.



Device power-up delay

Maximum time the device will take before it properly reports itself to the Host

Controller. 'Auto' uses the default value: for a Root port it is 100 ms, for a Hub

port the delay is taken from the Hub descriptor.

Summary of Contents for MIO-4370























































































Search results

Summary of Contents for MIO-4370

Reviews:

Related manuals for MIO-4370

Brands by name

Popular brands

Advantech MIO-4370, User Manual

Search results

Summary of Contents for MIO-4370

Reviews:

Related manuals for MIO-4370

Brands by name

Popular brands