MIO-2260 User Manual
38
Configure DRAM Timing by SPD
This item allows you to enables or disables detect by DRAM SPD .
Initate Graphic Aadapter
This item allows you to select which graphics controller to use as the primary boot
device.
Internal Graphics Mode Select
Select the amount of system memory used by the Internal graphics device.
Figure 3.25 Video function configuration
DVMT Mode Select
Displays the active system memory mode.
DVMT/FIXED Memory
Specify the amount of DVMT / FIXED system memory to allocate for video memory.
Boot Display Device
Select boot display device at post stage.
Flat Panel Type
This item allows you to select which panel resolution you wants.
Spread Spectrum Clock
This item allows you to enables or disables spread spectrum clock.
Backlight Control 1 Type
This item allows you to select backlight control type.
Backlight 1 Level
This item allows you to select backlight level.
Summary of Contents for MIO-2260
