MIC-75G20-10A2 Startup Manual 1
Before you begin installing your i-Module, please make sure
that the following items have been shipped:
1. MIC-75G20 i-Module x 1
P/N: MIC-75G20-
10A2
2. 4-Pin phoenix connector x 2
P/N: 1652003234
3. SATA cable (30 cm) x 1
P/N: 1700017838
4. SATA cable (40 cm) x 1
P/N: 1700020978-01
5. HDD BP power cable x 1
P/N: 1700024985-01
6. GPU power cable
P/N: 1700023022-01
(6- to 6/8-pin) x 2
7. Mounting bracket (L)
P/N: 1960005359T00A
8. Mounting bracket (R)
P/N: 1960094392N013
9. Screw for mounting bracket x 6 P/N: 1930007259-01
10. MIC-75G20 Startup Manual x 1 P/N: 20415G2010
If any of these items are missing or damaged, please
contact your distributor or sales representative immediately.
Note:
Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe)
PCIe Slots
•
One PCIe x16 socket
•
One PCIe x4 socket
MIC-75G20-10A2
GPU Card Expansion i-Module for MIC-7 Series
Embedded System
Startup Manual
Environment
•
Operating Temperature:
-10 ~ 60 °C (35W CPU w/ indus-
trial wide-temp. RAM/SSD)
•
Storage Temperature:
-40 ~ 85 °C (-40 ~ 185 °F)
•
Relative Humidity:
95% @ 40 °C (non-condensing)
Mechanical
•
i-Module Dimensions:
i-Module Dimension (W x H x D):
130 x 192 x 385 mm
•
With MIC-7 series:
With MIC-7 series (W x H x D): 207 x
192 x 385 mm
Note: Width will be increased by 4 mm with MIC-77xx.
Connectors
No.
Item
Function
1
DCIN1
24V
DC
in
2
PPCIE1
PCIe x16 slot
3
PPCIE2
PCIe x4 slot
4
SATAPWR1
4-pin SATA power connector (5V)
5
SATA1
SATA signal connector
6
GPUPWR1
6-pin power connector for GPU card
(12V, 17A)
7
GPUPWR2
6-pin power connector for GPU card
(12V, 17A)
8
DC12VOOUT1 4-pin power connector (12V, 5A)
9
SYSFAN1
4-pin fan connector
10
SYSFAN2
4-pin fan connector (reserved)
11
LED
GPU card power status
Specifications (Cont.)
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
This manual is for the MIC-75G20-10 Rev. A1.
Part No. 20415G2010
Printed in China
1st Edition
November 2022
I/O Connectors
Specifications
