background image

MIC-7500 User Manual

64

4.2.2

Windows 10 /Windows 8.1 /Windows 7 Driver Setup

Insert the driver CD into your system's CD-ROM drive. You can see the driver folders.
Navigate to the "02 Graphic" folder and click the executable file to complete the
installation of the drivers for Windows 7, Windows 8 and Windows 10.

4.3

Intel

®

 ME

4.3.1

Introduction

The Intel® ME software components that need to be installed depend on the sys-
tem's specific hardware and firmware features. The installer detects the system's
capabilities and installs the relevant drivers and applications.

4.3.2

Installation

Insert the driver CD into your system’s CD-ROM drive. Navigate to the "03_Intel ME"

folder and find folder "Intel ME" to install the driver.

Note!

Before installing these drivers, make sure the INF driver has been 
installed in your system. See Chapter 4 for information on installing the 
INF driver.

Note!

If the Intel® Management Engine (Intel® ME) driver has not been suc-
cessfully installed in Win7, please refer to the Win7 ME install process 
below.

Summary of Contents for MIC-7500




























































































Reviews: