Advantech MIC-3365, Manual

Page: 26 / 115

Chapter 1 Hardware Configuration 1 5
1.10 Installing CPU heat sink and HDD, FDD
brackets
The MIC-3365 accepts Intel ® socket 370 Pentium ® III Cuppermine
CPU or Intel ® socket 370 Celeron TM CPU. In order to meet critical
environmental conditions and the physical space of the MIC-3365 at
the same time, Advantech designed a heat sink to fulfill both needs.
Please refer to Figure 1-7 for an illustration of the heat sink used for
the MIC-3365 and MIC-3365D, 1-slot wide solution. Figure 1-8
illustrates the installation method of the heat sink, HDD, and FDD
brackets used for the MIC-3365F.
Because the thickness of the Pentium ® III and Celeron TM CPU are
different, Advantech provides a samll aluminum plate along with the
heat sink when installed with a Pentium
® III CPU. The small alumi-
num plate is default fastened on the heat sink in the factory. If users
would like to use a Celeron
TM CPU on the MIC-3365, please remove
the small aluminum plate from the heat sink.
Figure 1-6: Heat sink installation for 1U solution