i915GV2-IGM
2-7
Drive A [1.44M, 3.5 in.]
Specifies the capacity and physical size of diskette drive A. Do not
select [None] if you are using a floppy disk drive. Configuration options:
[None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
[2.88M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
Selects the operation mode of the floppy disk drive. Configuration options:
[Disabled] [Drive A]
Halt On [All, But Keyboard]
Sets the system to halt on errors according to the system functions
specified in each option. Configuration options: [All Errors] [No Errors]
[All, But Keyboard] [All, But Diskette] [All, But Disk/Key]
After entering the IDE hard disk drive information into the BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives. This is
necessary so that you can write or read data from the hard disk. Make sure to
set the partition of the Primary IDE hard disk drives to active.
