9.
Does the L3P Sonic Sifter have to be calibrated?
No. The L3P Sonic Sifter does not come calibrated. If the user wishes to establish defined testing
levels, it is recommended a decibel meter be purchased to aid in determining precise unit settings.
The sonic wave pulse rate is basically controlled by the line voltage hertz. Amplitude merely controls
the volume of the sound wave rather than the timing.
Test sieves, however, can be certified using Advantech’s
Centerline
©
Premium Sieve Certification
.
Utilizing our sophisticated image analyzer traceable to NIST, your sieve may be tested to any of the
following:
•
ASTM E 11-04 Sieve Certification can be provided for sieves being tested to the older ASTM E
11-04 Standard. Sieves measured to this standard will have 50 openings and 30 wires measured
along the x and y axes.
•
ASTM E 11-09 Inspection Certification can be provided for sieves being tested to the new 09
inspection standard. Sieves measured to this standard will have a percentage of openings and 10
wire dimension measured. This certificate provides a confidence level of 99% that the sieve is
within the specifications.
•
ASTM E 11-09 Calibration Certification can be provided for sieves being tested to the new 09
Calibration standard. Sieves measured to this standard will have at least twice as many apertures
measured than inspection sieves, thereby providing an increased confidence level of 99.73%
•
Please contact our Customer Service Team at 800.511.2097 or
instructions on how to send sieves in for service.
10.
What regular maintenance does the L3P Sonic Sifter require?
There is no routine maintenance required for the L3P Sonic Sifter. It is recommended the unit be kept
clean by regularly wiping it down with a soft, damp cloth.
11.
Does Advantech calibrate/certify test sieves for the L3P Sonic Sifter?
Yes. Test sieves can be certified using Advantech’s
Centerline
©
Premium Sieve Certification
. Please
see the answer to question nine for specifics on the varied levels of certification service Advantech
offers. For a
suggested re-certification schedule
, please contact our Customer Service Team at
800.511.2097 or
.
12.
What is the warranty on the L3P Sonic Sifter?
The L3P Sonic Sifter carries a one year limited warranty against defective material and workmanship.
13.
Can I use 3” brass sieves in my L3P Sonic Sifter?
No. The L3P Sonic Sifter is designed only for use with 3” acrylic sieves and the diaphragm and fines
collector. Metal 3” sieves are not compatible.
262-786-1600
Summary of Contents for L3P Series
