Advantech ITA-2230S, Startup Manual

Page: 2 / 7

2 ITA-2230S Startup Manual
Jumper/Connector Setting
The board has a number of jumpers and connectors that
allow you to configure your system to suit your application.
The table below lists the function of each of the jumpers
and connectors.
Name / Function
JCMOS1 Clear CMOS setting
PSON1 Power on mode setting
VCCGPIO1 GPIO voltage setting
VIO1
PC/104-Plus Connector VI/O
Voltage setting
COM 1~2 Serial ports
DVI-D DVI-Digital connector
DVI-I DVI-Integrated connector
USB 1~2 USB3.0 connector
USB 3~6 USB2.0 connector
DIO Digital I/O
Audio Audio in
JCMOS1: Clear CMOS Setting
Pins Setting
1-2 Default*
2-3 Clear CMOS setting
*Default setting
Default Clear CMOS
PSON1: Power On Mode Setting
Pins Setting
1-2 AT mode
2-3 ATX mode*
*Default setting
AT Mode ATX Mode
VCCGPIO1: GPIO Voltage Setting
Pins Setting
1-3 V5_SB)*
2-4 +V3.3_SB
3-5 +V5
4-6 +V3.3
*Default setting
VIO1: PCI VIO Voltage Setting
Pins Setting
1-6 +3.3V
4-9 5V)*
*Default setting
COM 1~2: Serial Ports
RS232 RS422 RS485
Pins Signal Name Signal Name Signal Name
1 DCD Tx- DATA-
2 RxD Tx+ DATA+
3 TxD Rx+ NC
4 DTR Rx- NC
5 GND GND GND
6 DSR NC NC
7 RTS NC NC
8 CTS NC NC
9 RI NC NC
DVI-D
Pins Signal Name Pins Signal Name
1 T.M.D.S. Data2- 13 T.M.D.S. Data3+
2 T.M.D.S. Data2+ 14 +5V Power
3
T.M.D.S. Data2/4
Shield
15 Ground (for +5V)
4 T.M.D.S. Data4- 16 Hot Plug Detect
5 T.M.D.S. Data4+ 17 T.M.D.S. Data0-
Jumpers and Connectors