Advantech IPPC-9151G, User Manual

Page: 41 / 60

33 IPPC-9151G/9171G User Manual
Chapter 3
B
IOS Setup

Activate Remote Assistance Process [Disabled]
The default setting is “Disabled”.

USB Configure [Enabled]
The default setting is “Enabled”.

PET Progress [Enabled]
The default setting is “Enabled”.

Intel AMT SPI Protected [Disabled]
The default setting is “Disabled”.

Watch Dog [Disable]
The default setting is “Disabled”. Users can enable this item when needed.
3.3.5 USB Configuration

Legacy USB Support [Enabled]
The user can enable or disable this function. The default setting is “Enabled”.

EHCI Hand-off [Disabled]
The default setting of EHCI (Enhanced Host Controller Interface) is “Disabled”.

USB Transfer time-out[20sec]
The default time interval is 20 seconds. The other options include 1sec, 5sec,
10sec and 20sec.

Device reset time-out[20sec]
The default time interval is 20 seconds. The other options include 10sec, 20sec,
30sec and 40sec.

Device power-up delay [auto]
The default setting is “Auto”. The user can choose “Auto” or “Manual”.