IPPC-6152F User Manual
40
CPU L1 & L2 Cache
Enabled (default) Enable cache
Disabled Disable cache
Note: The internal cache is built into the processor.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on
the computer. If this is set to Enabled, BIOS will shorten or skip some
check items during POST.
Enabled (default) Enable quick POST
Disabled Normal Normal POST
First/Second/Third Boot Device and Boot Other Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The settings are Hard
Disk,CDROM,USB-FDD,USB-ZIP,USB-CDROM,LAN 1,LAN 2 and
Disabled.
First boot device (default) USB-CDROM
Second boot device Hard Disk
Third boot device CDROM
NOTE: When you boot by USB- CDROM, please install WinXP with SP1
or Win 2000 with SP3.
Boot Up NumLock Status
On (default) Keypad: numeric keys
Off Keypad: arrow keys
Gate A20 Options
Normal
A20 signal is controlled by k/b controller or chipset.
Fast (default) A20 signal is controlled by port 92 or chipset specific.
Summary of Contents for IPPC-6152F Series
