IPC-7120 User Manual
10
Chapter 2 System Setup
The following procedures are intended to aid installation of a mother-
board, add-on cards, and disk drives into the IPC-7120 (IPC-5120).
Please also refer to Appendix A,
Exploded Diagram
, for all the parts of
the IPC-7120 (IPC-5120).
2.1 Removing the Chassis Cover
To remove the top cover of IPC-7120 (IPC-5120), refer to
Figure 2.1
and
proceed as follows:
1.
Loosen the two thumb screws on the rear top of the chassis.
2.
Remove the chassis top cover by gently sliding it backwards.
Figure 2.1: Removing the chassis cover
Note:
Use caution when installing or operating the
components with the chassis open. Be sure to
turn off the power, unplug the power cord and
ground yourself by touching the metal chassis
before you handle any components inside the
machine.
Summary of Contents for IPC-5120
