Advantech eki-7656c, User Manual, Page: 45 / 114

show qos
P
Displays the information of QoS
configuration Switch#
show qos
no qos
G
Disable QoS function switch(config)#
no qos
3.2.9 IGMP Commands Set
Table 3.9: QOS Commands Set
Command Level Description Example
igmp enable
G
Enable IGMP snooping function switch(config)#
igmp enable
Igmp-query auto
G
Set IGMP query to auto mode switch(config)#
Igmp-query auto
Igmp-query force
G
Set IGMP query to force mode switch(config)#
Igmp-query force
show igmp configuration
P
Displays the details of an IGMP
configuration. switch#
show igmp configuration
show igmp multi
P
Displays the details of an IGMP
snooping entries. switch#
show igmp multi
no igmp
G
Disable IGMP snooping function switch(config)#
no igmp
no igmp-query
G
Disable IGMP query switch#
no igmp-query
3.2.10 Mac/Filter Table Commands Set
Table 3.10: Mac/Filter Table Commands Set
Command Level Description Example
mac-address-table static hwaddr
[MAC]
I
Configure MAC address table of
interface (static). switch(config)#
interface fastEthernet 2
switch(config-if)#
mac-address-table static hwaddr
000012345678
mac-address-table filter hwaddr
[MAC]
G
Configure MAC address
table(filter) switch(config)#
mac-address-table filter hwaddr
000012348678
show mac-address-table P
Show all MAC address table switch#
show mac-address-table
show mac-address-table static P
Show static MAC address table switch#
show mac-address-table static
show mac-address-table filter P
Show filter MAC address table. switch#
show mac-address-table filter
no mac-address-table static hwaddr
[MAC]
I
Remove an entry of MAC address
table of interface (static) switch(config)#
interface fastEthernet 2
switch(config-if)#
no mac-address-table static
hwaddr 000012345678
no mac-address-table filter hwaddr
[MAC]
G
Remove an entry of MAC address
table (filter) switch(config)#
no mac-address-table filter hwaddr
000012348678
no mac-address-table
G
Remove dynamic entry of MAC
address table switch(config)#
no mac-address-table
3.2.11 SNMP Commands Set
Table 3.11: SNMP Commands Set
Command Level Description Example
snmp system-name
[System Name]
G
Set SNMP agent system name switch(config)#
snmp system-name l2switch
35 Chapter3