EKI-6333AC-2GD Series User Manual
47
The following figure displays enabled RSSI detection function.
RSSI Detection
Click to enable or disable the RSSI detection function. If it is
detected that the RSSI of the WLAN interface with master role is
poor than RSSI Threshold and is more than RSSI Differ worse
than the RSSI of another WLAN interface straight Failure Number
times, the master role will change to another WLAN interface.
RSSI Threshold
Enter the value to designate the signal strength setting (range 1 -
75, default 65).
RSSI Differ
If the slave scans and finds that the signal strength is better than
the originally connected AP, if it is greater than the set value, it will
switch to connect to the AP.(range 1 - 30, default 10)
Interval
Enter the value in ms to designate the interval time between link
queries (range 100 - 10000, default 100).
Failures Number
Enter the value to designate the failure threshold (range 1 - 10,
default 3).
Ping Detection
Ping Detection
Click to enable or disable the wireless link detection function. If the
device can't ping the specific IP address straight Failure Number
times, the master role will change to another WLAN interface.
IP Address
Enter the IP address of the remote device to test connectivity.
Timeout
Enter the value in ms to designate the timeout threshold (range 20
- 10000, default 100).
Interval
Enter the value in ms to designate the interval time between link
queries (range 20 - 10000, default 100).
Failures Number
Enter the value to designate the failure threshold (range 1 - 10,
default 3).
Item
Description
