EKI-6333AC-2G Series User Manual
19
3.1
Log In
To access the login window, connect the device to the network, see “Network
Connection” on page 14. Once the device is installed and connected, power on the
device see the following procedures to log into your device.
When the device is first installed, the default IP is 192.168.1.1. You will need to make
sure your network environment supports the device setup before connecting it to the
network.
1.
Launch your web browser on a computer.
2.
In the browser’s address bar type in the device’s default IP address
(192.168.1.1). The login screen displays.
3.
Enter the default user name and password (admin/admin) to log into the
management interface. You can change the default password after you have
successfully logged in.
4.
Click
Login
to enter the management interface.
Figure 3.1 Login Screen
Note!
Screen may differ depending on the Web browser.
Summary of Contents for EKI-6333AC-2G Series
