42
EKI-6333AC-1GPO Series User Manual
3.4.5.1
Topology
In Wireless Redundant mode, two wireless devices are setup. When a disruption or
poor signal event occurs and meets the specified conditions, the backup device is
initiated.
Figure 3.38 Wireless Redundant Topology
3.5
Network Settings
3.5.1
Static Route
A static route provide fixed routing path through the network. It is manually configured
on the router and must be updated if the network topology was changed recently.
Static routes are private routers unless they are redistributed by a routing protocol.
To access this page, click
Networking
>
Static Route
.
Figure 3.39 Networking
>
Static Route
The following table describes the items in the previous figure.
2.4G
5G
2.4G
5G
Ethernet
Ether
NB/PC
G
NB/PC
Ethernet
Item
Description
Target IP Address
Enter an IP address (static route) for this static route.
Netmask
Enter a netmask setting (static route) for this static route.
Gateway
Enter a gateway setting (static route) for this static route.
Interface
Enter an interface for this static route, options: LAN, WAN,
Wireless 2.4GHz, or Wireless 5GHz.
Metric
Enter the administrative distance (default: 1) used by the ap to
choose the best path for two or more routes to the same
destination.
MTU
Enter the maximum transmission value for the data packets if
applicable.
Delete
Click
Delete
to remove the route from the available list.
Add
Click
Add
to include the route in the static routing policy.
Submit
Click
Submit
to save the values and update the screen.
