28
EKI-6333AC-1GPO Series User Manual
Client Mode
To view the Advanced menu, the Basic Operation Mode must be designated to Client
Mode.
To access this page, click
Wireless - 2.4GHz
>
Advanced
.
Figure 3.18 Wireless - 2.4GHz > Advanced
The following table describes the items in the previous figure.
Item
Description
Client Settings
Roam
Click to enable or disable the Roam function allowing clients to
move faster between SSIDs. When fast Roam is enabled, the
client entry is not cleared and the delay is not enforced.
With Roam disabled, a delay is enforced before clients are allowed
to move between SSID.
RSSI threshold
Enter the value to designate the transmit power setting (range 1 -
75, default 65). A higher value causes the access points to operate
at higher transmit power rates. A lower value results in lowered
transmit power rates.
RSSI hysterisis
Enter the value to indicate how much greater the signal strength of
an access point must be to roam to it.
Range: 3 to 20 dB (default: 3 dB).
Scan interval(high)
The interval time during an active RSSI > RSSI threshold scan,
background scan. The default is 120 seconds.
Scan interval(low)
The interval time during a local RSSI <RSSI Threshold scan. The
default is 15 seconds
