EKI-1526(TI) | 1528(TI) User Manual
2
1.1
Introduction
This manual provides the necessary information to use the EKI-1526(TI) | 1528(TI).
The Advantech EKI-1500 series of serial device servers consist of fast and cost-
effective device servers between serial RS-232/422/485 and Ethernet interfaces.
The two Ethernet ports allow the EKI-1526(TI) | 1528(TI) to establish two separate
Ethernet connections to two Ethernet domains or switches in the same domain.
Through dual Ethernet connections, the EKI-1526(TI) | 1528(TI) greatly improve the
device connectivity reliability, increases system stability, and simplifies redundant
configuration.
By encapsulating serial data and transporting it over Ethernet, the EKI-1526(TI) |
1528(TI) allow virtual serial links over Ethernet and IP (TCP/IP, UDP/IP) networks.
After Advantech Serial Device Server Configuration Utility (including COM port redi-
rector driver) installation, standard serial operation calls are transparently redirected
to the serial device servers, guaranteeing compatibility with legacy serial devices and
enabling backward compatibility with existing software. The EKI-1526(TI) | 1528(TI)
also support serial tunneling, allowing two native serial devices to communicate over
a network without any hosts and programming. As a result, you can extend limited
distance, point-to-point, direct serial connections within the plant, throughout the fac-
tory, the facility, the office building, or across the global enterprise.
The EKI-1526(TI) | 1528(TI) are industrial-grade network-based serial device servers
for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs,
scales and scanners, directly to a TCP/IP network. The EKI-1526(TI) | 1528(TI) fea-
ture two independent Ethernet ports and MAC addresses to provide a redundant net-
work mechanism to guarantee Ethernet network reliability. The EKI-1526(TI) |
1528(TI) provide a simple and cost-effective way to bring the advantages of remote
management and data accessibility to thousand of devices that can't connect to an
Ethernet network. The EKI-1526(TI) | 1528(TI) offer multiple ways to configure
through Windows utility, Web Browser, serial console or Telnet console, these meth-
ods make it easy manage many EKI-1526(TI) | 1528(TI) or serial devices on your
network.
1.2
Device Features
8 or 16-port RS-232/422/485 serial communication
Provides 2 x 10/100/1000 Mbps Ethernet ports for LAN redundancy
Supports up to 976.5 kbps, and any baud rate setting
Provides COM port redirection (Virtual COM), TCP and UDP operation modes
Provides rich configuration methods: Windows utility, Telnet console, Web
Browser, and serial console
Built-in 15 KV ESD protection for all serial signals
SNMP MIB-II for network management
Built-in buzzer for easy location
Standard 1U rackmount size
Rear wiring
Automatic RS-485 data flow control
Summary of Contents for EKI-1526
