Advantech EAX-R680RP User Manual Download Page 42

Page: 42 / 95

EAX-R680RP

User’s Manual

42 EAX-R680RP

User’s Manual

3.6.1.1 System Language

This option allows choosing the system default language.

3.6.1.2 System Date

Use the system date option to set the system date. Manually enter the day, month and

year.

3.6.1.3 System Time

Use the system time option to set the system time. Manually enter the hours, minutes and

seconds.

Note:

The BIOS setup screens shown in this chapter are for reference purposes

only, and may not exactly match what you see on your screen.

Visit the Avalue website (

www.avalue.com.tw

) to download the latest

product and BIOS information.

3.6.2 Advanced Menu

This section allows you to configure your CPU and other system devices for basic operation

through the following sub-menus.

Summary of Contents for EAX-R680RP
































































































Search results

Summary of Contents for EAX-R680RP

Reviews:

Related manuals for EAX-R680RP

Brands by name

Popular brands

Advantech EAX-R680RP, User Manual

Search results

Summary of Contents for EAX-R680RP

Reviews:

Related manuals for EAX-R680RP

Brands by name

Popular brands