CP-150 User Manual --- Page 9
the left/right buttons on a mouse. You may also tap on the touch pad to
indicate a left click.
2.3.2 Side Panel
Depending on the system board and your add-on cards, you may also have
other ports such as the Ethernet and Audio ports. You may replace the cover
even though the other slots aren’t being used.
Figure 2-5
2.3.3 Power Switch and Plug
The power receptacle is located on the right side of the machine near the
bottom. The three-prong power plug is supplied. Depending on your Power
supply type, you may find the main power switch located next to the power
receptacle. The switch positions are: O=Off, 1=On. To power up the system,
you are still required to turn on the power from the front of the portable,
using the button labeled Power. If your power supply does not have a main
switch, you control the power using the switch at the front of the portable.
Summary of Contents for CP-150
