VESR9xx Serial Servers
25
IP ADDRESS
Software or hardware attempting to access the serial server via the
network must know the
IP Address
of the server. In DHCP mode
(factory default), the serial server requests and receives a dynamic IP
address from a DHCP server when it first connects to the network. If
there is not a DHCP Server on your network, this device will
automatically default to IP Address
169.254.102.39
. If the serial server is
unable to connect to your network using this address, there are two
methods to manually configure the IP Address.
1.
Method One:
Change your PC Network to Match the
Serial Server
a. Open the network connection on your PC.
b. Click on
Internet Protocol (TCP/IP)
and click
<Properties>
. Change the parameters to the
following:
IP Address = 169.254.102.1
Subnet Mask = 255.255.255.0
Default Gateway = 169.254.102.100
Summary of Contents for BB-VESR9 Series
Page 1: ...Ethernet Serial Servers BB VESR9xx series USER MANUAL...
Page 49: ...VESR9xx Serial Servers 43 Dimensional Diagram of Model VESR902D Serial Server...
Page 50: ...VESR9xx Serial Servers 44 Dimensional Diagram of Model VESR902D Serial Server...
Page 51: ...VESR9xx Serial Servers 45 Dimensional Diagram of Model VESR922T Serial Server...
