BB-VESP211x Serial Servers
:
36
TO WAIT UNTIL A SPECIFIC AMOUNT OF DATA IS RECEIVED ON THE SERIAL
PORT BEFORE SENDING IT ACROSS THE NETWORK
1. Select:
I want to wait for a specific amount of data to be received by the serial port
before sending it
in the
Character Count
box.
2. Type the desired number of characters into the text box.
TO FORCE THE SERIAL SERVER TO SEND DATA RECEIVED ON THE SERIAL
PORT WITHIN A SPECIFIED LENGTH OF TIME
1. Select:
I want to wait no longer than a specific amount of time after data is received
before sending it
in the
Forced Transmit
box.
2. Type the desired time period (in milliseconds) into the text box..
TO FORCE THE SERIAL SERVER TO SEND DATA WITHIN A SPECIFIED LENGTH
OF TIME AFTER RECEIVING IT
1. Select:
I want to send data immediately when no more characters are received for
in the
Intercharacter Timeout
box.
2. Type the desired time period (in milliseconds) into the text box.
TO FORCE THE SERIAL SERVER TO START BUFFERING DATA ONLY WHEN IT
RECEIVES A SPECIFIED ASCII CHARACTER ON ITS SERIAL PORT. NO DATA WILL
BE BUFFERED UNTIL THIS CHARACTER IS RECEIVED.
1. Select:
I want to begin buffering data when a specific character is received by the
serial port
in the
Delimiter 1
box.
2. Type the ASCII character into the text box.
Note: Delimiter 1 cannot be used alone. Either Delimiter 2 or one of the transmit timers must be used with it.
TO FORCE THE SERIAL SERVER TO SEND DATA WHEN IT RECEIVES ANOTHER
SPECIFIED ASCII CHARACTER ON ITS SERIAL PORT
1. Select:
I want to send data immediately when another specific character is received
by the serial port
in the
Delimiter 2
box.
Type the ASCII character into the text box.
TO FORCE THE SERIAL SERVER TO REMOVE THE DELIMITER CHARACTERS
FROM THE DATA WHEN IT SENDS IT ON ITS SERIAL PORT
1. Select:
I want to remove the delimiter characters from the data before sending the
data.