IE-iMcV-2xLIM
4
ABOUT THE IE-IMCV-2XLIM
The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module that provides two
conversions of 100Base-TX twisted pair to 100Base-FX/SX single-mode or multi-
mode fiber. There are two sets of ports, each providing an RJ-45 (copper) to SFP
(fiber) an SFP,155 Mbps, can be installed in the SFP port.
IE-iMcV-2xLIM, TX/SFP with Configuration Control support allows two
wavelengths to share one fiber strand - full-duplex data travels on different
wavelengths (for example,1310 nm and 1550 nm) - doubling the capacity of fiber.
The IE-iMcV-2xLIM, TX/SFP is SNMP-manageable and can be installed into the
modular, SNMP-manageable iMediaChassis, the MediaChassis series, or the
MediaChassis series which are unmanaged.
A single DIP Switch bay offers configuration for each RJ-45 to fiber interface set:
DSW 1-5 for Port 1 and DSW 6-10 for Port 2.
NOTE
: Some options require items that are sold separately, available from B+B SmartWorx.
CONFIGURATION INSTRUCTIONS
The IE-iMcV-2xLIM, TX/SFP has user-configurable maintenance features (e.g.,
TX LinkLoss (TXLL), FX LinkLoss (FXLL), Link Fault Pass-Through (LFPT) and
Far End Fault (FEF)). Refer to the iMcV-Module DIP Switch configuration table
for information on available features. Instructions for configuring both managed
(via an SNMP-compatible management application like iView²) and unmanaged
modules follow.
Summary of Contents for B+B SmartWorx IE-iMcV-2xLIM
Page 1: ...IE iMcV 2xLIM USER MANUAL...
