IE-iMcV-2xLIM
11
LED OPERATION
The IE-iMcV-2xLIM, TX/SFP module features diagnostic LEDs that provide
information on features and ports:
FXLL
Glows green when FX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the fiber port
and actively disables the copper port.
TXLL
Glows green when TX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the copper
port and actively disables the fiber port.
LNK/ACT
Glows green when the fiber or copper link
is established.
Blinks green when activity is detected.
FEF
Glows green when the FEF function is
enabled on the fiber port and will blink if it
is receiving the FEF signal.
DIS
TX DISABLE (DIS) LED is OFF by default.
To disable the port and stop transmission
of data, this can be set through iView
²
management or by setting DIP Switch #5
or #10 OFF (dependent on whether the
selection is for Port A or Port B).
Summary of Contents for B+B SmartWorx IE-iMcV-2xLIM
Page 1: ...IE iMcV 2xLIM USER MANUAL...
