Advantech ASMB-816 Series, User Manual

Page: 11 / 110

3 ASMB-816 User Manual
Chapter 1
Overview
1.3 Specifications
Table 1.1: Specifications
Processor
CPU

Dual Intel LGA4189 Xeon processor sockets

Supports Intel 3rd Gen Xeon Scalable family, up to 40 cores

Supports the TDP of processor up to 270W
(Please consider extended air thermal solution while using CPU
> 205W TDP)
System Memory
Memory Capacity

Supports DDR4 ECC-REG memory module

Total 8 memory slots provided

Supports up to 512 GB RDIMM/1TB LRDIMM

One DIMM per channel
Memory Type Supports DDR4 2666/2933/3200 MHz RDIMM/LRDIMM modules
DIMM Sizes
Each memory slot supports 8GB, 16GB, 32GB, 64GB and 128GB
(LRDIMM) memory modules
Memory Voltage 1.2 V
Error Detection

Corrects single-bit errors

Detects double-bit errors (using ECC memory)
On-Board Devices
Chipsets Intel C621A PCH
Network Controllers

2 x Intel X550 10GbE and 2 x Intel I210 Gigabit Ethernet Con
-
troller connected to PCH (ASMB-816 I & T2 SKUs)

Above network supports 10 GbE Base-T and 100/1000 Base-T,
with RJ-45 output
VGA
ASPEED AST2500/2510 controller with 64 MB VGA memory pro
-
vides basic 2D VGA function
EC
ITE IT8528E chip provide motherboard keyboard mouse,
RS-232, and hardware monitor functions
BMC
One Realtek 8201F Gigabit PHY connected to AST2500 for BMC
remote management (ASMB-815I & T2 SKUs)
Input/Output
Storage

Total 8 x SATA ports and 1 x M.2 (SATA/PCIe x4 compatible)
provide 6 Gb/s and 8 Gb/s bandwidth

RAID 0, 1, 5, 10 support (Windows only)
LAN

4 x RJ-45 LAN ports (2 x 10GbE + 2 x 10/100/1000 Base-T
LAN)

1 x RJ-45 Dedicated IPMI LAN port (10/100 Mbps) for IPMI
only, there is no regular LAN function (ASMB-816 I & T2 SKUs)
USB

4 x USB 3.0 ports + 2 x USB 2.0 ports at rear window

1 x USB 3.0 internal header (2 ports)

2 x USB 2.0 internal headers (4ports)

1 x internal Type-A USB 2.0 port
Graphics

1 x VGA port.
Keyboard/Mouse

PS/2 keyboard and mouse internal header (onboard)
Serial Port/Header

1 x RS232 port at rear window, 1 x internal header (2 x 5P pitch:
2.50 mm)